When you select at least one fixture, the SAVE CUE button appears at the right top corner of the screen. You can just tap SAVE CUE and then select a cue memory to save the Cue. Note that only the fixtures that are selected on the moment that you click save cue, will be included in the cue. all the rest stays in manual control.

You can go to the Cue page by tapping the button in the overview page.

When you tap LOAD once, you just load a cue directly. By tapping LOAD a second time, the cue is opened and all fixtures that are in the cue become selected. Now you can change the cue if needed. And just save it again.

Each Cue has an own fading time, that you can set from 0,1 to 30 seconds with the rotary. You can start a fade in by tapping start or on the Flash button. The FADE time can be changed during the fade.

By pressing once all enabled cues will be played once and by pressing loop the enabled cues will be played in a loop. You can enable/disable cues while the loop is running. By tapping a flash button the loop will jump to that cue. The HOLD time is the time that a cue shows. You can change HOLD and FADE times while the loop is running.